Lash Tweezer Cleaner
Regular price $7.50Tweezer Debonder is the perfect solution to remove adhesive from your tweezers without damaging your tools. This does not sanitize tweezers, but it is a solution to removing adhesive build up on your tweezers.
Directions:
- Simply apply a thin layer on your tweezers where the adhesive is and wait for a couple of minutes.
- Use a paper towel to wipe the adhesive off.
- Rinse with water and dry.
Warning: this is to remove adhesive from your tweezers ONLY. This is NOT a remover from eyelash extension.
10 mL bottle
Liquid products, including adhesive, primers, bonders, and cream based products cannot be returned.
MSDS
MSDS |MATERIAL SAFETY DATA SHEET
Section 1 – Chemical Product and Company Identification
|
MSDS NAME |
AD-1 DEBONDER |
|
COMPANY ADDRESS |
1285 Financial Blvd, Reno, NV 89502
775-440-1208
|
|
FOR REMOVING DRIED GLUE ON TWEEZERS ONLY |
|
Section 2 – Composition and Ingredient Information
Ingredient Component Name
N-Heptane CAS 142-82-5 95-97%
Proprietary Additive 3-5%
Section 3 – Hazards Identification
|
Hazard Risk Classification |
Classification according to Regulation (EC) No 1272/2008 Flammable liquids (Category 2), H225 Skin irritation (Category 2), H315 Specific target organ toxicity - single exposure (Category 3), Central nervous system, H336 Aspiration hazard (Category 1), H304 Acute aquatic toxicity (Category 1), H400 Chronic aquatic toxicity (Category 1), H410 |
|
|
Eye: Irritating to eyes. Liquid or high vapor concentration can cause pain and irritation with slight corneal injury possible
Skin: Prolonged or repeated skin contact can cause irritation and dermatitis through defatting of skin. Prolonged contact can result in skin absorption
Inhalation: May cause respiratory tract irritation.
Ingestion: Can cause burning of nose and throat
|
|
|
|
Section 4 – First Aid Measures
|
Inhalation |
Immediately remove to open space with fresh air. Seek medical attention to treat symptomatically if discomfort persists. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. |
|
Eye Contact |
Rinse with copious amounts of water for at least 15 minutes. Get emergency medical assistance |
|
Skin Contact |
Flush thoroughly for at least 15 minutes. Wash affected skin with soap and water. Remove contaminated clothing and shoes. Wash clothing before re-use and discard shoes. Get emergency medical assistance |
|
Ingestion |
Ingestion is not likely. Call the local Poison control center for assistance. Contact the physician immediately. DO NOT Induce vomiting or give anything by mouth to a unconscious victim or persons having convulsions
|
|
|
|
Section 5 – Fire Fighting Measures
|
Specific Hazard |
N/A |
|
Flash Point |
NA |
|
Auto Ignition temperature |
NA |
|
Flammable/Explosive Limits-lower% |
6.7% |
|
Flammable/Explosive Limits-upper% |
1.2% |
|
Hazardous Decomposition Materials |
Carbon oxides Flashback possible over considerable distances. |
|
Suitable Extinguishing Media |
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. |
|
Protective Equipment |
Wear self-contained breathing apparatus for firefighting if necessary. |
|
Hazardous combustion products |
NA |
|
Unusual fire or explosion hazard |
Concentrated vapors can be ignited by a high intensity heat source or flame. Toxic and corrosive gases are formed from a high intensity heat source or flame. Toxic and corrosive gases are formed on contact with flames or hot glowing surfaces |
Section 6 – Accidental Release Measures
|
Environmental precautions |
Spill or leak-wear protective clothing and use approved respirator equipment. Absorb spilled material in an absorbent recommended for solvent equipment. Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. |
|
Disposal and Clean Up |
Do not use cloths for mopping up. Absorb spilled material in an absorbent recommended for solvent spills and remove to a safe location for disposal by approved methods. If released to the environment, comply with all regulatory notification requirements
|
Section 7 – Handling and Storage
|
Handling Precautions |
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the buildup of electrostatic charge. |
|
Storage |
Store in a cool place. Keep the container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. |
Section 8 – Exposure Controls and Personal Protection
|
Engineering Controls |
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. |
|
Respiratory Protection |
Where risk assessment shows air-purifying respirators are appropriate, use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). |
|
Skin Protection |
Handle with gloves. protective gloves and clothing are recommended. The choice of material must be based on chemical resistance and other user requirements. Generally, viton, polyvinyl alcohol, or neoprene offer acceptable chemical resistance. Individuals who are acutely and specifically sensitive to n-Heptane may require additional protective equipment. |
|
Eye/Face protection |
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU) |
Section 9 – Physical and Chemical Properties
|
Physical State |
Clear Liquid |
|
Odour |
Faint |
|
pH |
N/A |
|
Specific Gravity |
.688 |
|
Boiling Point |
98 ℃ |
|
Flash Point |
-4℃ Tagliabue closed cup |
|
Flammability |
1 |
|
Evaporation Rate(Ether=1) |
2.7 |
|
Ignition Temperature |
NA |
|
Melting/Freezing Point |
-91 ℃ |
|
Solubility |
Immiscible |
|
Vapour Density |
3.52 |
|
Vapour Pressure |
40 |
|
Volatile Organic Compound(EPA Method24) |
99.9% |
Section 10 – Stability and Reactivity
|
Stability |
Stable under recommended storage conditions |
|
Conditions to Avoid |
Heat, sparks, open flame, open containers, poor ventilation and moisture. |
|
Incompatible Materials |
Strong oxidizing agents - strong acids - strong bases - strong reducing agents.
|
|
Hazardous Polymerization |
NA |
|
Hazardous decomposition |
Phosgene, hydrogen chloride and chlorine |
Section 11– Toxicological Information
Primary routes of entry: n-Heptane may exert its effects through inhalation, skin absorption and ingestion
Effects of overexposure: Inhalation and ingestion are harmful and ma be fatal. Inhalation may cause headache, nausea, vomiting, dizziness, narcosis, suffocation, lower blood pressure, and central nervous system depression. Inhalation of vapors may cause severe irritation of the respiratory system. Liquid may be irritating to skin and eyes. Prolonged skin contact may result in dermatitis. Eye contact may result in temporary corneal damage. Ingestion may cause nausea, vomiting, gastrointestinal irritation, and burns to mouth and throat.
Section 12– Ecological Information
|
Ecotoxicity |
No data available |
|
Persistence/Degradability |
No data available |
|
Bioaccumulative Potential |
No data available |
|
Mobility in Soil |
No data available |
Section 13– Disposal Consideration
WASTE DISPOSAL:
Dispose of n-HEPTANE as an EPA hazardous waste. Contact state environmental agency for listing of licensed hazardous waste disposal facilities and applicable regulations.
HAZARDOUS WASTE NUMBERS: D001.
Section 14– Transport
DOMESTIC (D.O.T.)
DOT_HAZARD: ORM-D CLASS 3, PACKING GROUP 11
SHIP_NAME: CONSUMER COMMODITY OR HEPTANES SOLUTION
UN/NA: UN1206
LABELS: NONE
MARINE POLLUTANT NONE
INTERNATIONAL (I.M.O.)
DOT_HAZARD: SHIP_NAME: CLASS 3, PACKING GROUP 2
UN/NA: UN1206
Section 15– Regulatory Information
This safety data sheet complies with the regulatory requirement
Section 16– Other Information
DISCLAIMER:
All the information in the Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Tong Shen cannot accept any liability for the results whatsoever arising from the use of Tong Shen’s products due that the utilization of these products is simply out of Tong Shen’s control. The users are responsible for selecting the suitability of the products and methods of use